Ironing can feel like a chore, but cordless ironing? That’s a game-changer. The Tefal Freemove Air Cordless Steam Iron is designed to make everyday ironing faster, easier and far more comfortable; no more tangling cords, tugging cables, or restricted movement.
If you’ve just bought one (or are thinking about it), this guide explains exactly how to use it properly so you get the best performance every time.
Unbox and Set Up the Charging Base
The Freemove Air comes with a separate charging base. This is where the iron rests between strokes and recharges.
How to set it up:
-
Place the base on a stable, heat-resistant surface, usually at the end of your ironing board.
-
Plug the base into a wall outlet.
-
Make sure the base is positioned so you can easily slide the iron on and off.
Tip: The base should sit close enough that you can lift and return the iron in one fluid motion.
Fill the Water Tank
Your iron uses steam to remove creases faster, so you’ll want to fill the water tank before starting.
Steps:
-
Unplug the iron from the base.
-
Open the water-tank cover.
-
Fill with clean tap water (avoid distilled water unless your manual says otherwise).
-
Close the cover securely.
Don’t overfill - there’s a max line to guide you.
Preheat the Iron
Place the iron back on the base to heat up.
-
Select your preferred temperature setting depending on your fabric (e.g., low for silk, high for cotton).
-
The iron will heat within seconds.
-
When it’s ready, the indicator light will stop blinking (or make a readiness sound depending on model).
Iron as Usual - Without the Cord
Here’s the fun part: once heated, you simply lift the iron off the base and start ironing completely cord-free.
What to expect:
-
You typically get 20-30 seconds of cordless ironing before needing to recharge.
-
When the iron beeps or cools slightly, just place it back on the base for a few seconds - it reheats quickly.
-
The constant lift-iron-return rhythm becomes natural after a couple of minutes.
Use Steam Boost for Tough Creases
The Freemove Air includes a steam burst or steam boost button for stubborn wrinkles.
To use it:
-
Hold the iron over the crease.
-
Press the steam boost button for a powerful shot of steam.
-
Glide over the area again for a crisp finish.
Tip: For delicate fabrics, avoid direct steam or use a pressing cloth.
Vertical Steaming
Need to refresh hanging clothes or curtains?
The Freemove Air can also act as a vertical steamer.
How:
-
Keep the iron cordless in hand.
-
Hold it upright a few centimetres away from the garment.
-
Press the steam button and move up and down to relax wrinkles.
Ideal for quick refreshes.
Return the Iron Frequently to Recharge
Because it’s cordless, the iron relies on regular docking.
Best practice:
-
Every few passes, slide the iron back onto the base.
-
It reheats rapidly so there's no slowing down.
-
This prevents the iron from cooling and keeps steam output strong.
Think of it like pausing briefly between strokes - smooth and natural.
Using the Tefal Freemove Air Cordless Steam Iron is incredibly intuitive once you get into the rhythm of lifting, ironing, and recharging. Its cordless convenience makes ironing feel smoother and far less frustrating, ideal for busy households or anyone who hates dealing with cables.